<< All Construction Programs

To provide the fundamental skills and knowledge applicable to mobile hydraulic crane operation and rigging and to obtain employment in the excavation and/or construction industries as an entry level rigger or crane operator.

Red Rock College fully endorses the national certification program offered by The National Commission for the Certification of Crane Operators (NCCCO) and will prepare candidates for the CCO tests.

CCO Exam Results

Weeks to Complete: Full Time - 6 Weeks
Credits: 12.23
Cost: Please call for current tuition and fees

Books, Tools and Supplies

10000 - Orientation

In this class policies, procedures, training hours and safety requirements are explained to the students.  (Lec 4.00 Cl Hrs / Lab 0.0 Cl Hrs / Ext 0.0 Cl Hrs / .27 Sem Cr Hrs) [Prerequisite:  None]

21201-04 - Communication

This class covers the fundamentals of the communication process; addressing abstractions, fear, and lack of experience; and environmental factors.  Covers verbal and nonverbal  methods of communications.  Takes an in-depth look at the ASME B30.5 hand signals, including the appropriate operator action when the signal is given and the expected machine movement.  (Lec  4.00 Cl Hrs /  Lab 0 Cl Hrs / Ext 0 Cl Hrs / .27 Sem Cr Hrs ) [Prerequisite:  None]

21104-04 - Crane Safety

This course introduces  the student to various safety aspects of mobile crane operation, including equipment inspection, site hazard identification, and required personal protective equipment. Discusses how to work with site plans and specifications.  (Lec 2.00 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .13 Sem Cr Hrs ) [Prerequisite: None]

21102-04 -  Basic Principles of Cranes

Offers students an introduction to mobile crane equipment with an in-depth discussion of terminology and nomenclature. Explains the basic scientific principles associated with mobile crane operations. (Lec 2.00 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .13 Sem Cr Hrs ) [Prerequisite: None]

21105-04 - Operating a Crane

Describes the basic functions of a crane as well as standard procedure for starting up and shutting down a crane. Provides the student with the opportunity to become familiar with the actual operation of a crane and the functions of its controls. (Lec 4.00 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .27 Sem Cr Hrs )  [Prerequisite: None]

21202-04 - Machine Power Flow

 Discusses the various power systems that enable different cranes to perform their work. Diesel and gasoline/propane engines and electrical/motor-generator, as well as mechanical, electrical, pneumatic, and hydraulic power systems are discussed.  (Lec 4.00 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .27 Sem Cr Hrs  [Prerequisite: None]

21205-04 - Computer/Operator Aids

Provides information on load moment indicators, anti-two-block devices, load indicators, and other operator aids that are installed in cranes. An in-depth look at the input devices associated with these operator aids and the information they provide is also included.  (Lec 4.00 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .27 Sem Cr Hrs [Prerequisite: None]

38201-06 - Wire Rope

This class will discuss the components and limits of wire rope. An in-depth look at the selection, installation, inspection, handling, and maintenance will also be covered.  (Lec 4.00 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .27 Sem Cr Hrs )  [Prerequisite: None]

21103-04 -  Rigging

This course offers the student an in-depth understanding of the fundamentals of rigging. Discusses a variety of rigging gear, components and configurations and their applications within the mobile crane industry. Students get hands on practice rigging loads to be lifted. (Lec 4.00 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .27 Sem Cr Hrs )  [Prerequisite: None]

GA001 - Green Awareness

This course covers the impacts of the built environment on the green environment.  It introduces methods to reduce the impact on the green environment and explains how to apply the principles of a green building rating system.  (Lec 8.00 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / 0.53 Cr Hrs [Prerequsites:  None]

10001 - Weights, Measurements & Calculations

In this class the student will be given basic math functions, formulas, symbols, and definitions. They will be shown formulas for calculating volume of different geometric configurations and converting the solutions to weight using tables and charts.  (Lec 4.00 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .27 Sem Cr Hrs )  [Prerequisite: None]

10010 - Introduction to Load Charts

In depth look at load/ capacity charts including crane and boom configurations, crane base configurations, and quadrants of operations. Students will be given exercises to solve the many situations and variations from basic chart information.  (Lec 4.00 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .27 Sem Cr Hrs )  [Prerequisite: None]

10011 - Advanced Load Charts

Students will be introduced to 17 load charts of various crane models. The students will be shown load calculations and be given exercises to complete.  (Lec 8.00 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .53 Sem Cr Hrs )  [Prerequisite: None]

10012 - Trade Standards

In this class students will be introduced to additional OSHA and ANSI standards and practices for safe crane operation, maintenance and operator conduct.  (Lec 12.00 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .80 Sem Cr Hrs )  [Prerequisite: None]

10013 - Green Certification Examination

The  Green Advantage Certified Practitioner examination will be given.  The exam is administered by a certified Green Advantage Examiner.  (Lec 4.00 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .27 Sem Cr Hrs  [Prerequisite:  Successfully complete the Green Advantage class.]

10015 - NCCCO Practical Examination

The NCCCO practical examination for LARGE TELESCOPIC cranes will be given.  The exam is administered by a certified NCCCO examiner.  (Lec  0 Cl Hrs / Lab 8.00 Cl Hrs / Ext 0 Cl Hrs / .27 Sem Cr Hrs )  [Prerequisite: Successfully complete the Mobile Crane or Mobile Crane 3 Week program.]

10014 - NCCCO Written Examination

The NCCCO written examination for CORE and LARGE TELESCOPIC cranes will be given.  The exam is administered by a certified NCCCO examiner.  NCCCO requires that applicants show proof of passing the DOT physical in order to sit for the exam.  Either the DOT or NCCCO physical exam form must be used.  (Lec 4.00 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .27 Sem Cr Hrs )  [Prerequisite: Successfully complete the Mobile Crane or Mobile Crane 3 Week program.]

38203-06 -Lattice  Boom Assembly/Disassembly

Provides a step-by-step approach to the assembly and disassembly of long and short lattice booms.  (Lec 4.50 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .30 Sem Cr Hrs  [Prerequisite: None]

10002 - Estimating Load Weights

Students will complete practical exercises calculating approximate weight and center of gravity of geometric configuration made of and containing different materials.  (Lec 1 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .07 Sem Cr Hrs  [Prerequisite: None]

38205-06 - Advanced Rigging Practices

Students, using a load configuration, will be shown how to find center of gravity of a load and the amount of sling tension applied.  (Lec 9.00 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .60 Sem Cr Hrs  [Prerequisite: None]

38202-06 -Telescopic  Boom Assembly/Disassembly

Covers the extension and stowing of the swing-away extension, A-frame jib, and auxiliary single-sheave boom head, as well as the assembly and removal of intermediate boom sections.  (Lec 4.50 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .30 Sem Cr Hrs  [Prerequisite: None]

38204-06 - Lift Planning

This class discusses the factors and considerations involved in lift planning and implementation. OSHA and ANSI determinations will be reviewed and discussed.  (Lec 9.00 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .60 Sem Cr Hrs  [Prerequisite: None]

21203-04 - Preventive Maintenance

Covers preventive maintenance and compliance inspections on a crane. The trainee will gain an understanding of the safety considerations, procedures, and equipment/materials required for these inspections.  (Lec 9.00 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .60 Sem Cr Hrs  [Prerequisite: None]

38206-06 - Personnel Lifting

This course discusses ASME B30.23 and 29 CFR 1926.550(g) requirements while presenting advanced operation techniques for hoisting. Upon completion of this subject, students will be able to: 1) Identify which federal regulations apply to hoisting personnel; 2) Identify which consensus standards apply to hoisting personnel.  (Lec 4.50 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .30 Sem Cr Hrs  [Prerequisite: None]

21307-04 - Emergency Procedures

This course covers all OSHA and ANSI standards governing crane operation near and around power lines/sources. 1) Regulations of working cranes near power lines. 2) Weather conditions that effect working near power lines. 3) Emergency procedures when crane comes in contact with power lines.  (Lec 4.00 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .13 Sem Cr Hrs  / .27 Sem Cr Hrs CO & KS [Prerequisite: None]

21207-04 - On-Site Equipment Movement

Covers site hazards and restrictions that could hinder on-site crane movement; safety considerations involved in crane movement over unlevel ground; pick-and-carry operations; and power line contact. Flotation capacity is also addressed.  (Lec 4.50 Cl Hrs / Lab 0 Cl Hrs / Ext 0 Cl Hrs / .30 Sem Cr Hrs  [Prerequisite: None]

LAB00043 -Operation, Rigging and Flagging

This lab is designed for the trainee to put into action what they have learned in the classroom. The trainee will perform several basic lifts with the rough terrain crane. They will move and set up the unit in a stable area. The trainee will also perform the necessary preventative maintenance required by this machine to keep it functioning properly. In addition the trainee will practice and perform the rigging operations required for the lifts to be made. Under the guidance of their instructor, they will select the correct rigging hardware and rig the load to be lifted. The trainee will also demonstrate the proper ANSI hand signals while other students perform the lift. Upon completion of this lab, students will be able to: 1) Correctly rig various loads for lifting: 2) correctly signal a crane operator for lifting a load.  (Lec 0 Cl Hrs / Lab 106 Cl Hrs / Ext 0 Cl Hrs / 3.53 Sem Cr Hrs  [Prerequisite: None]

Crane graduates will have taken the first steps towards National Certification from the National Commission for the Certification of Crane Operators (NCCCO).

Education Pays!

We encourage all students to obtain as much schooling as possible. When it comes time to find employment or negotiate salary with an existing employer, the more knowledge and experience you have on a wide variety of machinery, the better you'll look to an employer - and that translates to more money for you and your family!